Genuine OEM Nissan RH Rear Window Upper Moulding – R32 Skyline Coupe / BNR32 GT-R – 79752-04U10
Restore the original factory appearance of your Nissan Skyline with the Genuine OEM Nissan Right-Hand Rear Window Upper Moulding – 79752-04U10, a factory replacement exterior trim component designed for compatible R32 Skyline Coupe and BNR32 GT-R models.
This genuine Nissan moulding forms part of the rear windscreen exterior trim assembly, fitting along the right-hand upper section of the rear window to provide a clean, factory-finished appearance between the glass and surrounding bodywork.
After more than three decades, original R32 Skyline rear window mouldings can become faded, scratched, bent, corroded or damaged through exposure to sunlight, weather, previous glass removal and general ageing.
Damaged or missing mouldings can detract from the appearance of the rear windscreen and surrounding bodywork, particularly on vehicles undergoing a full restoration or repaint.
Replacing damaged trim with a genuine Nissan component helps restore the intended factory appearance and fitment without relying on universal mouldings or modified aftermarket alternatives.
Whether you're completing a detailed BNR32 Skyline GT-R restoration, repainting an R32 GTS-t Coupe or replacing damaged trim following rear windscreen removal, this genuine Nissan moulding is an excellent choice for maintaining original exterior details.
Important: This listing includes one (1) Right-Hand (RH) Rear Window Upper Moulding – 79752-04U10 only. On Australian right-hand-drive vehicles, the right-hand side is the driver's side.
Product Details
- Brand: Genuine OEM Nissan
- Part Number: 79752-04U10
- Product Type: Rear Window Upper Moulding / Rear Windscreen Exterior Trim
- Position: Right-Hand (RH)
- Australian RHD Position: Driver's Side
- Installation Location: Right-Hand Upper Rear Windscreen Trim
- Body Style: R32 Skyline 2-Door Coupe / BNR32 GT-R
- Construction: Factory-Specification Exterior Trim
- Quantity Supplied: One (1) Moulding
- Condition: Brand New – Genuine Nissan
Vehicle Compatibility
- Nissan Skyline R32 GTS Coupe – Selected Models
- Nissan Skyline R32 GTS-t Coupe – Selected Models
- Nissan Skyline R32 GTS-4 Coupe – Selected Models
- Nissan Skyline GT-R BNR32 – Selected Models
Important Fitment Information: This moulding is intended for the rear windscreen trim assembly on compatible R32 Skyline 2-door models only.
Not Suitable for R32 Four-Door Sedans: The sedan rear window and associated trim components differ from the coupe and GT-R arrangements.
Please confirm Nissan part number 79752-04U10 and the required mounting position against your original moulding or the applicable Nissan factory parts catalogue before purchasing.
Rear Window Upper Moulding Guide
- Right-Hand (RH) / Driver's Side: 79752-04U10 – This Listing
- Left-Hand (LH) / Passenger Side: 79751-04U10 – Sold Separately
Complete Upper Moulding Replacement: For vehicles requiring both upper rear window mouldings, order one (1) 79752-04U10 and one (1) 79751-04U10.
Other rear window mouldings, mounting clips, retainers and glass installation materials may also be required depending on the condition of the existing components.
Key Features & Benefits
- Genuine OEM Nissan replacement component
- Designed for compatible R32 Skyline Coupe and BNR32 GT-R models
- Right-hand upper rear windscreen trim position
- Factory-style exterior moulding profile and appearance
- Restores the original rear window exterior finish
- Replaces faded, bent, corroded or damaged original trim
- Manufactured to Nissan's original specifications
- Designed for the compatible factory rear window arrangement
- Ideal for repainting, glass replacement and restoration projects
- Maintains original Nissan exterior trim details
Restore the Factory Rear Window Appearance
The rear windscreen mouldings are an important visual detail of the R32 Skyline's exterior design.
These components provide a finished transition between the rear glass and surrounding bodywork, helping maintain the vehicle's original factory appearance.
Over time, original mouldings can become damaged through environmental exposure, previous repairs or improper removal.
Installing a genuine Nissan replacement moulding helps restore the intended factory finish when fitted with the correct associated components.
Important: Rear window mouldings are exterior finishing components and should not be relied upon as the primary waterproof seal for the rear windscreen. The glass bonding and sealing system must be installed correctly to prevent water ingress.
Signs Your Rear Window Moulding May Need Replacing
- Faded or weathered exterior finish
- Bent, distorted or damaged original trim
- Corrosion or deterioration of the original moulding
- Loose or incorrectly fitted trim
- Damage caused during rear windscreen removal
- Missing sections following previous repairs
- Visible gaps or poor alignment around the rear glass
- Refreshing exterior trim during a full restoration
Rear Windscreen Moulding vs Rear Quarter Window Trim
This product is intended for the rear windscreen upper moulding assembly on compatible R32 Skyline two-door models.
It should not be confused with the separate rear quarter-window mouldings located around the fixed side windows behind the doors.
These components have different mounting locations and part numbers and are not interchangeable.
Ordering Tip: When restoring the rear glass area of an R32 Skyline, inspect the upper and lower rear windscreen mouldings, retaining components and surrounding glass seals for damage.
Ideal for R32 Skyline & GT-R Restorations
Rear window mouldings are particularly important when restoring a classic R32 Skyline, as worn or damaged trim can stand out against freshly painted bodywork.
Replacing these components with genuine Nissan parts helps maintain the correct factory exterior appearance.
This moulding is ideal for:
- BNR32 Skyline GT-R restorations
- R32 GTS-t and GTS-4 Coupe restorations
- Replacing damaged right-hand rear windscreen trim
- Full vehicle repainting projects
- Rear windscreen removal and replacement
- Accident damage repairs
- Refreshing aged exterior mouldings
- Maintaining original Nissan bodywork details
Installation Information
Rear windscreen mouldings can be delicate and may require specialised installation procedures depending on the condition of the glass and associated retaining components.
Before installation, confirm the correct mounting position and inspect the existing rear windscreen trim assembly.
Carefully remove the original moulding following the applicable Nissan workshop procedure, taking care not to damage the glass, surrounding paintwork or mounting surfaces.
Inspect any associated retainers, clips and mounting components for damage or deterioration.
Fit the genuine Nissan replacement moulding using the correct factory installation method, ensuring it is positioned and secured correctly.
Professional Installation Recommended: Depending on the original installation arrangement, rear windscreen removal may be required. Consult a qualified automotive glazier before attempting removal or installation.
Important: Do not force the moulding into position or use unsuitable adhesives as a substitute for the correct factory retaining system.
What's Included?
- 1 × Genuine OEM Nissan RH Rear Window Upper Moulding – 79752-04U10
Not Included: Left-hand upper moulding (79751-04U10), lower rear window mouldings, rear windscreen glass, mounting clips, retainers, adhesives, glass bonding materials or installation labour unless specifically stated.
Why Choose Genuine Nissan?
Genuine Nissan replacement mouldings are manufactured to the original specifications for their intended vehicle applications.
For classic Skyline and GT-R restorations, correct moulding shape, dimensions and fitment are important for maintaining the original exterior appearance.
Whether you're completing a detailed restoration or replacing damaged rear window trim, genuine Nissan components are an excellent choice for preserving your R32 Skyline's factory finish.
Note: This listing includes one (1) Genuine OEM Nissan Right-Hand Rear Window Upper Moulding – 79752-04U10 only. Suitable for compatible R32 Skyline 2-door models. The matching left-hand upper moulding (79751-04U10) and other rear window installation components are sold separately. Supplied in genuine Nissan packaging, which may be removed for product photography.
Australian Stock & Fast Dispatch: At OEM4JDM, every part listed as In Stock is physically on our shelf in Australia and ready for fast dispatch.